Skip to content
Fertilizer Dose logoFertilizer Dose

Wheat

بيانات مؤكدة

Triticum aestivum

رابي (شتاء) · Punjab, India (PAU)

توصية السماد

N 124P₂O₅ 62K₂O –kg/ha

Source: PAU Package of Practices for Crops of Punjab, Rabi 2025–26 (IN-Punjab; K soil-test-based, no blanket K dose)

احسب لأرضي

How to Apply Fertilizer Correctly

Practical field advice for Wheat — knowing how to apply fertilizer matters as much as knowing how much.

What is the correct way to flood DAP for Wheat?
Dissolve the DAP with a DAP solvent in a drum so it fully dissolves. Do NOT open the drum valve at the start of irrigation — wait until the water has covered about 25% of the plot (roughly 1–1.5 kanal in). Then open the valve. Close the drum valve about 10 minutes before you stop the water, so the last flow of water carries the dissolved fertilizer evenly to the far end of the field.
Should urea be flooded with irrigation water, or broadcast afterwards?
Do NOT flood urea. Flooding loses 40–50% of nitrogen through leaching (deep percolation) and denitrification (lost as gas). Instead, broadcast (chhatta) the urea 1–3 days after irrigation, when the soil is moist (tar-wattar condition). This gives 30%+ better absorption than flooding.
How can I distribute fertilizer evenly across the field?
Open the fertilizer drum valve only after irrigation water has already entered 1–1.5 kanal — opening it too early empties the drum before the far end is reached. If the field is not laser-leveled, divide one acre into 2–4 plots (kyare): 2 plots for heavy clay soils, 3–4 for loam, and fertigate each plot separately. Keep checking both the field and the drum during irrigation until you get a feel for the timing.
When should phosphorus and potash be applied?
Phosphorus (P₂O₅) and potash (K₂O) are best applied at sowing as a basal dose, placed in the seedbed. If you missed it at sowing, dissolve the fertilizer (use a DAP solvent for DAP) and flood it at the first or second irrigation — flooding is far more effective than broadcasting for phosphorus and potash at that stage.

ظروف النمو

التربة
Well-drained loam to clay loam; pH 6.0–7.5.
الماء
4–6 irrigations: crown-root initiation (~21 days) is the most critical.
موسم النمو
Sow late October – November; harvest March – April.
المناطق المناسبة
Punjab, India (PAU)

مراحل النمو والتسميد

1

Basal (at sowing) · Day 0

Full phosphorus + potassium + ⅓ nitrogen with seedbed preparation.

2

Crown root initiation · ~21 days

⅓ nitrogen with first irrigation — the most critical top-dressing.

3

Flowering · ~60–70 days

Remaining ⅓ nitrogen before flowering.

انتبه لـ

AphidsRust (yellow/brown)Termites in light soilsLodging from excess nitrogen

هل ترى أعراضًا؟ جرّب Plant Doctor ←

أسمدة ذات صلة

UreaDAPMOP

خيارات الأسمدة العضوية

يمكن استخدام روث المزرعة المتعفن جيدًا أو السماد العضوي أو السماد الدودي كمكيف قاعدي للتربة لـ Wheat - فهو يبني بنية التربة ويطلق العناصر الغذائية ببطء على مدار الموسم. ونظرًا لاختلاف محتوى المغذيات العضوية حسب المصدر، قم بزيادة الاحتياجات الغذائية الدقيقة باستخدام الأسمدة المعدنية المحسوبة لمحصولك ومنطقتك.

لا توجد جرعة عضوية محددة لهذا المحصول - التوجيهات المذكورة أعلاه هي ممارسة عامة، وليست توصية محسوبة. قم باختبار المواد الخاصة بك معمليًا للتخطيط الدقيق.

استكشاف الأسمدة العضوية →

المراجع

  • Provincial agriculture departments / research institutes. PAU Package of Practices for Crops of Punjab, Rabi 2025–26 (IN-Punjab; K soil-test-based, no blanket K dose) — Punjab, India (PAU)

آخر مراجعة: 2026-10-01