Skip to content
Fertilizer Dose logoFertilizer Dose

Wheat

Verified data

Triticum aestivum

Rabi (winter) · Punjab, India (PAU)

Fertilizer recommendation

N 124P₂O₅ 62K₂O –kg/ha

Source: PAU Package of Practices for Crops of Punjab, Rabi 2025–26 (IN-Punjab; K soil-test-based, no blanket K dose)

Calculate for my land

How to Apply Fertilizer Correctly

Practical field advice for Wheat — knowing how to apply fertilizer matters as much as knowing how much.

What is the correct way to flood DAP for Wheat?
Dissolve the DAP with a DAP solvent in a drum so it fully dissolves. Do NOT open the drum valve at the start of irrigation — wait until the water has covered about 25% of the plot (roughly 1–1.5 kanal in). Then open the valve. Close the drum valve about 10 minutes before you stop the water, so the last flow of water carries the dissolved fertilizer evenly to the far end of the field.
Should urea be flooded with irrigation water, or broadcast afterwards?
Do NOT flood urea. Flooding loses 40–50% of nitrogen through leaching (deep percolation) and denitrification (lost as gas). Instead, broadcast (chhatta) the urea 1–3 days after irrigation, when the soil is moist (tar-wattar condition). This gives 30%+ better absorption than flooding.
How can I distribute fertilizer evenly across the field?
Open the fertilizer drum valve only after irrigation water has already entered 1–1.5 kanal — opening it too early empties the drum before the far end is reached. If the field is not laser-leveled, divide one acre into 2–4 plots (kyare): 2 plots for heavy clay soils, 3–4 for loam, and fertigate each plot separately. Keep checking both the field and the drum during irrigation until you get a feel for the timing.
When should phosphorus and potash be applied?
Phosphorus (P₂O₅) and potash (K₂O) are best applied at sowing as a basal dose, placed in the seedbed. If you missed it at sowing, dissolve the fertilizer (use a DAP solvent for DAP) and flood it at the first or second irrigation — flooding is far more effective than broadcasting for phosphorus and potash at that stage.

Growing conditions

Soil
Well-drained loam to clay loam; pH 6.0–7.5.
Water
4–6 irrigations: crown-root initiation (~21 days) is the most critical.
Growing season
Sow late October – November; harvest March – April.
Suitable regions
Punjab, India (PAU)

Growth stages & feeding

1

Basal (at sowing) · Day 0

Full phosphorus + potassium + ⅓ nitrogen with seedbed preparation.

2

Crown root initiation · ~21 days

⅓ nitrogen with first irrigation — the most critical top-dressing.

3

Flowering · ~60–70 days

Remaining ⅓ nitrogen before flowering.

Watch out for

AphidsRust (yellow/brown)Termites in light soilsLodging from excess nitrogen

Seeing symptoms? Try the Plant Doctor →

Related fertilizers

UreaDAPMOP

Organic fertilizer options

Well-rotted farmyard manure, compost or vermicompost can be used as a basal soil conditioner for Wheat — they build soil structure and release nutrients slowly over the season. Because organic nutrient content varies by source, top up the precise nutrient need with mineral fertilizer calculated for your crop and region.

No crop-specific verified organic dose exists for this crop — the guidance above is general practice, not a measured recommendation. Get your material lab-tested for precision planning.

Explore organic fertilizers →

References

  • Provincial agriculture departments / research institutes. PAU Package of Practices for Crops of Punjab, Rabi 2025–26 (IN-Punjab; K soil-test-based, no blanket K dose) — Punjab, India (PAU)

Last reviewed: 2026-10-01